repair-it.info

Maintenance of a hardwood floor in a manner that it continues to look new all the time is not a skilled job, but it certainly needs to be taken care of on a regular basis.Especially for rooms that experience heavy traffic or are exposed to additional “treatment” from kids and pets, it’s essential that you keep an eye for suspicious stains, marks and spilled or sticky substances.

Floors can be categorized in two: wax finished and surface finished and each needs to be treated in a different manner. Apart from the regular cleaning that involves dust-mopping, sweeping and proper vacuuming, you should be aware of how to take care on their getting damaged accidently which can’t be avoided for ever. So you have to take warnish steam cleaner seriously.

Starting with the regular cleaning routine itself, never use water to clean the surface. It’s important to get instructions and recommendations of the floor manufacturer or the floor finish manufacturer, as the case be, to check the use of damp mops for cleaning, otherwise water can cause immediate irreparable damage to the protective coating and subsequently to the main floor.Once done, the floor would experience many negative side effects such as buckling and crowning, as well as the surface losing its color and shine. Recommended cleaners by the manufacturer should only be used, in stead of using dust and surface cleaners that are often found in most of the homes. If the latter is unknown, use a generic hardwood floor cleaner that’s designed for the type of floor finish you have.

You should not delay taking action against any stains caused by ink or pets. You would almost always have to use a very fine or fine steel wool to take off the finish away (wax or polyurethane) before you can reach the contamination.

It’s good idea to use Oreck floor scrubber besides regular equipment. Use the specified wood floor cleaner along with a bit of mineral spirits to get rid of the stain, give sometime for the area to get dried up and then apply wax before finally buffing it.

Figure out what type of floor you have installed so you can start with proper cleaning. In case you are a proud owner of a sealed floor, then it is most likely a surface sealed floor that will not take much of your time. You probably have a penetrating seal treated floor if you have older floor installed. You will need to apply more oils and wax to maintain this type of floor.

For cleaning hardwood floors, in the case of a surface sealed floor, you merely need to mop using a product recommended by your flooring manufacturer. To be safe, use only products that do not have any oil included. For this type of flooring, one soap and one damp mop would be a safe solution. Since wood floors can be damaged with sitting water, you have to dry the surface completely when you finish your task.

In case you have a penetrating seal floor in your home, you won’t be able to use water based products while mopping. Instead, for routine cleanings, you can simply sweep or vacuum your floor. Every once in a while, for a deeper cleaning, you will need to strip the old wax coating and apply a new one. Usually, you will need to do this two times a year, but you can do it more often.

Manufacturers directions should be follower while using stripper here. Make sure you have a good ventilation so your hardwood floors can dry properly. Check what kind of wax can be used on your type of floor, the manufacturer should tell you this. Follow directions and apply one or two coats, or as many as desired.

Applying home floor scrubber is the last and most important step. It’s necesasry to use process like this so you can achieve beautiful shine and that the wax can properly sink in the floor. Most people think it is a great idea to buy wood floor buffer because it helps them finish the job sooner and with less hassle. I think it is very important to know that a new floor bufer machines you buy will pay itself off after you use it for several times.